Abstract
A lead-free piezoelectric ceramic, (1-x)Ba(Zr_0.2Ti_0.8)O₃-x(Ba_0.7Ca_0.3)TiO₃ (hereafter (1-x)BZT-xBCT), was investigated for functional device applications. Lead-free piezoelectric materials with high piezoelectric charge coefficients and voltage coefficients are indispensable for functional industrial applications. Piezoelectric ceramic specimens tend to shrink in size during the sintering process without melting. This study focused on this phenomenon..... More

Abstract
A copper (Cu) metal-ceramic filler composite with high thermal conductivity and a suitable thermal expansion coefficient was designed for application as a high-performance heat dissipation material. The purpose of the designed material was to utilize the high thermal conductivity of Cu while lowering its high coefficient of thermal expansion by..... More

Abstract
This study evaluated changes in delta-ferrite content depending on the preheating of AISI 316L stainless steel. We also determined the reasons for the variation in delta-ferrite content, which affects corrosion resistance. Changes in delta-ferrite content after preheating was confirmed using a Feritscope, and the microstructure was analyzed using optical microscopy..... More

Abstract
This study was conducted to evaluate the corrosion resistance and optimize the heat-treatment process of AISI 439 ferrite stainless steel silicon and tin alloys with reduced chromium. The microstructure of the specimens and deposition under each condition were analyzed. The production of oxide films was compared based on the thickness..... More

Abstract
Radiation causes damage to the human body, the environment, and electronic equipment. Shielding against neutron and gamma rays is particularly difficult because of their strong ability to penetrate materials. Conventional gamma ray shields are typically made of materials containing Pb. However, they pose problems in that Pb is a heavy..... More

Abstract
In this study, half-Heusler (HH) thermoelectric materials Nb_0.8Hf_0.2FeSb_0.98Sn_0.02 (p-type) and Hf_0.25Zr_0.25Ti_0.5NiSn_0.98Sb_0.02 (n-type) were synthesized using induction melting and spark plasma sintering. For alloying, a conventional induction melting technique was employed rather than arc melting, for mass production compatibility, and the thermoelectric properties of the materials were analyzed. The maximum dimensionless..... More

Abstract
A three-dimensionally interconnected graphene-reinforced Cu (3Di Gr-Cu) composite was synthesized using a simple two-step process technique which involves the mechanical compaction of micronsized Cu particles followed by chemical vapor deposition (CVD) at 995 ℃. The microstructural properties of pure Cu and the 3Di Gr-Cu composite were investigated by optical..... More

Abstract
Silicon (Si) has a high theoretical capacity and low working potential vs. Li/Li⁺, and has been investigated as the most capable negative electrode material for lithium-ion batteries (LIBs). However, Si undergoes significant volume changes during the Li⁺ alloying/ dealloying processes, leading to unstable cycle life and limiting its practical applicability..... More

Abstract
Using ethylene glycol (C₂H₆O₂) as the solvent, ZnS particles were synthesized in high yield at a relatively low temperature of 125 ^oC via the glycothermal method. We report a facile method for preparing spherical self-aggregated ZnS particles from ZnS nanocrystals, using zinc acetate as the Zn²⁺ source and thiourea as..... More

Abstract
In this study, tetrahedrite compounds doped with Sn were prepared by mechanical alloying and hot pressing, and their charge transport and thermoelectric properties were analyzed. X-ray diffraction analysis revealed that both the synthetic powders and sintered bodies were synthesized as a single tetrahedrite phase without secondary phases. Densely sintered specimens..... More

Abstract
In this work, MnO₂ nanoparticles were embedded in a carbon matrix as a porous composite, fabricated using a simple chemical route followed by low-temperature annealing, with activated carbon (AC) as the carbon source in the composite preparation. The porous MnO₂/carbon structures contained some selective nanoparticles coated with carbon. The structural..... More

Abstract
The paper provides experimental details of the welding and specific examples of welding aluminum welding battery cans and conductive tabs for battery pack manufacture. In this study, we provide experimental details of a process for joining dissimilar materials used in sealing battery parts. A laser brazing technique was used for..... More

Abstract
The bonding properties of adhesives are mainly affected by surface roughness, topography and chemical adsorption. In this paper, we studied the effects of surface pretreatment of Al 2024-T3 (bare) in terms of surface roughness, topography and surface free energy. Surface pre-treatment included solvent cleaning, FPL etching, PAA and CAA treatment...... More

Abstract
Tetrahedrite is a promising thermoelectric material mainly due to its low thermal conductivity, a consequence of its complicated crystal structure. However, tetrahedrite has a high hole concentration; therefore, optimizing carrier concentration through doping is required to maximize the power factor. In this study, Te-doped tetrahedrites Cu₁₂Sb_4-yTe_yS₁₃ (0.1 ≤ y ≤..... More

Abstract
The microstructure, mechanical properties and residual stress of flux-cored arc welded ASTM A516-70N carbon steel using a Mn-based low-temperature transformation (LTT) welding consumable were investigated. Microstructural analysis with X-ray diffraction, an electron backscattered diffractometer and a field-emission scanning electron microscope showed that the LTT weld metal was made up of..... More

Abstract
A three-dimensionally interconnected hexagonal boron nitride (3Di-hBN) networked Cu-Ni (3DihBN-Cu-Ni) composite was successfully synthesized in situ using a simple two-step process which involved the compaction of mixed Cu-Ni powders (70 wt.% Cu and 30 wt.% Ni) into a disc followed by metal-organic chemical vapor deposition (MOCVD) at 1000 ^oC. During..... More

Abstract
Transition-metal-based layered double hydroxides (LDHs) have attracted substantial attention as highly efficient oxygen evolution reaction (OER) catalysts because they are earth-abundant, low-cost, and environmentally friendly materials with favorable adsorption/desorption energies for intermittent reactants. However, the application of these LDHs as high-performance electrocatalysts is often hindered by their relatively sluggish electronic..... More

Abstract
Permingeatites Cu₃Sb_1−yGe_ySe₄ (0 ≤ y ≤ 0.14) were synthesized by mechanical alloying and hot pressing. The charge-transport parameters (Hall coefficient, carrier concentration, mobility, and Lorenz number) and thermoelectric properties (electrical conductivity, Seebeck coefficient, power factor, thermal conductivity, and figure of merit) were examined with respect to the Ge doping level...... More

Abstract
Intensive research has been conducted to develop flexible piezoelectric pressure sensors, since selfpowering devices are advantageous for wearable electronic applications. Recently, two types of piezoelectric devices, ceramic-PDMS composite film and PVDF nanofiber mats, have drawn attention in the research community. Piezoelectric ceramics such as BaTiO₃ (BTO) and PZT exhibit outstanding..... More

Abstract
W-containing Ti-6Al-4V alloys (W=0, 1, and 5 wt%) were fabricated by the powder injection molding process, and the corresponding effects of tungsten content on the mechanical properties and microstructure of the alloys were investigated. The alloy powders were sintered at 1200 °C and then hot-isostatically-pressed at 900 °C. The fabricated..... More

Abstract
A photo-rheological fluid (PRF) is a smart fluid which exhibits different viscosity under UV irradiation. A PRF is comprehensively presented in this work, with particular focus on its responses under UV off/on conditions. The isomeric conversion from SP to MC and vice versa under UV off and on, respectively, showed..... More

Abstract
Mn-doped tetrahedrites Cu_12-xMn_xSb₄S₁₃ (0.1 ≤ x ≤ 0.4) were synthesized by mechanical alloying (MA) and sintered by hot pressing (HP). A single tetrahedrite phase was synthesized by MA without post-annealing, and it was stable without any phase changes after HP. The hot-pressed specimens had a relative density higher than 98.6%...... More

Abstract
Boron Nitride Nanotubes (BNNT) are one of the candidate materials for storing hydrogen by physical adsorption. It has been reported that this hydrogen storage capacity increases as the crystallinity of the nanostructures decreases. Here, BNNT was synthesized using an RF plasma torch system, and the surface of the BNNT was..... More

Abstract
La/Ce-partially double-filled and Co-charge-compensated (La_1−zCe_z)_0.8Fe_4−xCo_xSb₁₂ skutterudites were synthesized, and their thermoelectric properties were studied by varying the filling ratio and charge compensation. X-ray diffraction analysis revealed that the matrix phase was skutterudite and a secondary phase was determined to the marcasite FeSb₂. However, the formation of marcasite could be inhibited..... More

Abstract
Zinc oxide (ZnO) simultaneously exhibits semiconducting and piezoelectric properties. ZnO in the form of nanorods has been studied intensively for application in self-powering devices. The power generation in piezoelectric nanogenerators based on ZnO nanorods can be improved via several approaches, including an oxygen plasma treatment. When ZnO nanorods are exposed..... More

Abstract
We grew ZnO nanorods (NRs) using a hydrothermal method while rotating the precursor solution, and report the effect of rotation on surface modification, and the optical and ultraviolet (UV) photoresponse properties of the resulting ZnO nanorods. The ZnO NRs grown in the rotating precursor solution at 100 rpm had the..... More

Abstract
In this study, an effective method is demonstrated for fabricating titanium sputtering targets, which are used to fabricate thin films in the semiconductor industry. The method is an alternative to the existing electron beam melting (EBM) process under high vacuum. Titanium sputtering targets used in the production of semiconductors must..... More

Abstract
When an elastomeric photomask is used for near-field contact printing, the high deformability of the elastomer mask plate enables gap-free full contact with the substrate, minimizing the effect of diffraction. This image-transfer technique provides sub-50 nm resolution and depth-of-focus-free lithographic capability with cost-efficient equipment. However, the method’s application is limited..... More

Abstract
The formation of porous material structures has been widely investigated for the development of high-performance energy materials, catalysts, and chemical sensing devices. Various nanoporous structure fabrication methods are based on wet-chemical processes, which require precise control of the process parameters. Physical vapor deposition such as thermal evaporation utilizes high vacuum..... More

Abstract
α-Ga₂O₃ has the largest bandgap (~5.3 eV) among the five polymorphs of Ga₂O₃ and is a promising candidate for high power electronic and optoelectronic devices. To fabricate various device structures, it is important to establish an effective dry etch process which can provide practical etch rate, smooth surface morphology and..... More